Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
1～13 item / All 13 items
Dual joint fitting 294-9107.33-10010 one-touch installation
● No screws, nuts, or washers are needed due to the snap-in design. Please refer to the DST series introduction for details. ● Since welding is not required, installation time is significantly reduced, leading to cost savings. ● Two adjacent panels can be joined together.
Joint fitting 294-9003 type with one-touch installation and earth clip included.
● Achieves one-touch installation with sufficient strength. No screws or welding are required. For details, please refer to the DST series introduction. ● Just by installing it, the earth clip scrapes the paint off the mounting surface, allowing the joined panels and fasteners to conduct electricity, functioning as grounding between the panels. ● Can connect two or more adjacent panels.
Helping you create a stylish space! Easy-to-install metal hinges using wood screws.
The "Kinaore Black and Off-White" from Ōdai is a joint fitting used for reinforcing and securing shelves and boxes. It can be easily installed using wood screws. By using black or off-white fittings, you can create a simple and sophisticated atmosphere in your kitchen or living room. 【Features】 ■ For reinforcing and securing shelves and boxes ■ Easy installation using wood screws ■ Available in black and off-white ■ Enhances the sophistication of your kitchen or living room *For more details, please feel free to contact us.
An accent for connecting boards and boxes! Joint fittings that enhance the space.
The "I-Plate Black and Off-White" from Dairi is used to connect two boards in parallel. It also serves as an accent for joining boards or boxes. Using a white base creates a natural taste atmosphere, while incorporating black easily adds a rugged or junky feel. 【Features】 ■ Used to connect boards in parallel ■ Accent for joining boards or boxes ■ A natural taste when based on white ■ Incorporating black creates a rugged and masculine style *For more details, please feel free to contact us.
Improved corrosion resistance: New release of galvanized products! Detachment prevention fittings for Atoms coupling.
Significantly reduce the risk of disconnection! We mitigate the risk of piping disconnecting from the Atom's coupling due to insufficient bolt tightening. *For those interested, we also provide access to "tensile test data," so please feel free to contact us. 【Features】 ■ Simple installation by just tightening the bolts. ■ Solid support with a joint fitting that has a thickness of 6mm (Note 1) and an angle piece. ■ The joint fitting bolts use high-strength bolts with a strength classification of 10.9 (Note 2), allowing for tightening at high torque values. Note 1: For sizes 20A to 32A, the thickness is 4.5mm. Note 2: Galvanized products are equivalent to 8.8. *For more details, please refer to the PDF materials or feel free to contact us.
The inclination angle of the external joint is 30 degrees, and the wedge has a shape that makes it easy to drive in with a hammer or similar tool.
The "Top Metal" is a fitting that secures the outer joint at the top of the pipe house and the straight pipe in a cross shape. To prevent the vinyl from tearing, the gap between the outer joint and the bend of the main body is minimized. Additionally, the top metal wedge is designed for easy driving with a hammer or similar tool. 【Features】 ■ Secures the outer joint and straight pipe in a cross shape ■ The inclination angle of the outer joint is 30 degrees ■ The gap between the outer joint and the bend of the main body is small ■ The top metal wedge is shaped for easy driving with a hammer or similar tool ■ Material uses thick plating with a JIS standard Z27 and a plating adhesion of 360g or more *For more details, please refer to the PDF document or feel free to contact us.
Easily join commercially available single pipes! Joint fittings that anyone can beautifully finish.
The "Single Pipe Joint" is a joint fitting that connects commercially available single pipes (outer diameter 48.6mm). Depending on your ideas, you can easily construct various items such as handrails, fences, cages, walls, guardrails, fences, work tables, shelves, car stops, signs, and sheds. After the screw reaches the pipe, turning it about once will provide the appropriate tightening. 【Features】 ■ Outer diameter 48.6mm ■ Easily joints commercially available single pipes ■ Anyone can achieve a beautiful finish ■ Various items can be easily constructed ■ Material: Zinc alloy, surface treatment, electroplating (unichrome) *For more details, please refer to the PDF document or feel free to contact us.
![[DST Joint Fittings] Reduce total costs without welding!](https://image.mono.ipros.com/public/product/image/b9b/2000485005/IPROS38249312854166562931.jpeg?w=280&h=280)
Joint fitting model 294-9106, one-touch installation.
● No screws, nuts, or washers are required due to the snap-in design. Please refer to the DST series introduction for details. ● Since welding is not necessary, installation time can be significantly reduced, leading to cost savings. ● It is possible to connect two adjacent panels or three or more panels. ● A new compatible total plate thickness type of 4.2 to 6.2 has been added.
An accent that adds a rugged and junky feel to the space! Hardware that can be used for joining and reinforcing wood.
The "L-shaped Plate Black/Off-White" from Dairi is used for joining and reinforcing wood, as well as when you want to secure wood vertically. By installing black or off-white L-shaped plates at the corners, you can not only reinforce but also add an accent of ruggedness and a junky feel. 【Features】 ■ For joining and reinforcing wood ■ Colors available: Black and Off-White ■ An accent that adds ruggedness and a junky feel *For more details, please feel free to contact us.
For reinforcing and securing shelves and boxes! A metal fold that can be finished with a sense of heaviness in the interior design.
The "Special Thick Metal Bracket - Black/Off-White" from Dairi is used for reinforcing and securing shelves and boxes. It can be easily installed using wood screws. The thick special metal bracket has high strength, allowing for the installation of thicker shelves, and it can also be finished as a luxurious interior element. 【Features】 ■ For reinforcing and securing shelves and boxes ■ Easy installation using wood screws ■ Special thick design allows for the installation of thicker shelves ■ Can be finished as a luxurious interior element *For more details, please feel free to contact us.
For reinforcing and securing shelves and boxes! A metal fold that can be finished with a sense of heaviness as an interior design element.
The "T-Plate Black and Off-White" from Dairi is used to connect boards vertically. By using the T-Plate in the partition sections of boxes and shelves, it not only provides reinforcement but also serves as an accent to freely create your desired space. Let's create an atmosphere that suits your preference, whether it's café style, Brooklyn style, junk style, rustic style, or retro. 【Features】 ■ Used to connect boards vertically ■ Used in partition sections of boxes and shelves for reinforcement ■ Freely create your desired space *For more details, please feel free to contact us.
Using couplings for the connection of pressure piping reduces the risk of disconnection due to insufficient bolt tightening.
Significantly improved work efficiency! A clear comic explanation of 'Nakedome-kun', born from requests by general contractors. - How can we use coupling joints more safely and securely? - How is 'Nakedome-kun' installed? We solve your questions! Please download the materials and make use of them. Substantially reduce the risk of pipe disconnection! It mitigates the risk of pipes disconnecting from Atom's coupling due to insufficient bolt tightening. *For those interested, we also provide access to 'Tensile Test Data', so please feel free to contact us. 【Features】 ■ Simple installation by just tightening the bolts. ■ Firmly supported by joint fittings with a thickness of 6mm (*) and angle pieces. ■ High-strength bolts of strength class 10.9 are used for the joint fitting bolts, allowing for tightening at high torque values. (* For sizes 20A to 32A, the thickness is 4.5mm) *For more details, please refer to the PDF materials or feel free to contact us.
